国产精品久久久久无码av色戒,大帝av在线一区二区三区,国产肥熟女视频一区二区三区,大陆少妇xxxx做受,被黑人猛躁10次高潮视频

15 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

Features ? Halogen free available upon request by adding suffix -HF ? Mounting Hole For #8 Screw ? Plastic Case With Metal Bottom ? Any Mounting Position ? Surge Rating Of 300 Amps ? Epoxy meets UL 94 V-0 flammability rating ? Moisture Sensitivity Level 1 ? Lead Free Finish/Rohs Compliant

SINGLE PHASE 15 AMP BRIDGE RECTIFIERS

VOLTAGE RANGE 50 to 1000 Volts CURRENT 15.0 Amperes FEATURES * 300 amperes surge capability * Superior thermal design * Mounting: Hole thru for #8 screw * Case: Epoxy case with Heat Sink internally Mounted in the Bridge encapsulation

SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER (VOLTAGE RANGE 50 to 1000 Volts CURRENT 15 Amperes)

文件：28.54 Kbytes Page：2 Pages

15 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

文件：244.14 Kbytes Page：3 Pages

整流橋

1.3MHz Low Power LED Torch/Flash Driver

GENERAL DESCRIPTION The EV0062 is an evaluation board designed to drive up to four (4) white LEDs in series. The board is based on MPS’ MP1541 SOT23 current mode step up converter. The MP1541 is intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny,

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a 5-pin thin SOT23 current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extend

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a 5-pin thin SOT23 current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extend

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery l

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

1.3MHz Boost Converter

DESCRIPTION The MP1541 is a current mode step up converter intended for small, low power applications. The MP1541 switches at 1.3MHz and allows the use of tiny, low cost capacitors and inductors 2mm or less in height. Internal soft start results in small inrush current and extends battery life. T

700KHz/1.3MHz Boost Converter with a 2A Switch

DESCRIPTION The MP1542 is a current mode step up converter with a 2A, 0.18? internal switch to provide a highly efficient regulator with fast response. The MP1542 can be operated at 700KHz or 1.3MHz allowing for easy filtering and low noise. An external compensation pin gives the user flexibility

700KHz/1.3MHz Boost Converter with a 2A Switch

DESCRIPTION The MP1542 is a current mode step up converter with a 2A, 0.18? internal switch to provide a highly efficient regulator with fast response. The MP1542 can be operated at 700KHz or 1.3MHz allowing for easy filtering and low noise. An external compensation pin gives the user flexibility

700KHz/1.3MHz Boost Converter with a 2A Switch

DESCRIPTION The MP1542 is a current mode step up converter with a 2A, 0.18? internal switch to provide a highly efficient regulator with fast response. The MP1542 can be operated at 700KHz or 1.3MHz allowing for easy filtering and low noise. An external compensation pin gives the user flexibility

700KHz/1.3MHz Boost Converter with a 2A Switch

DESCRIPTION The MP1542 is a current mode step up converter with a 2A, 0.18? internal switch to provide a highly efficient regulator with fast response. The MP1542 can be operated at 700KHz or 1.3MHz allowing for easy filtering and low noise. An external compensation pin gives the user flexibility

1.5A, 500KHz Synchronous Rectified Step-up Converter

DESCRIPTION The MP1543 is a highly efficient, synchronous, fixed frequency, current-mode step-up converter with output to input disconnect, inrush current limiting and internal soft-start. It includes an error amplifier, ramp generator, comparator, N-Channel switch and P-Channel synchronous rec

1.5A, 500KHz Synchronous Rectified Step-up Converter

DESCRIPTION The MP1543 is a highly efficient, synchronous, fixed frequency, current-mode step-up converter with output to input disconnect, inrush current limiting and internal soft-start. It includes an error amplifier, ramp generator, comparator, N-Channel switch and P-Channel synchronous rec

15 Amp Single Phase Bridge Rectifier 50 to 1000 Volts

Features ? UL Recognized File # E165989 ? Mounting Hole For #8 Screw, Plastic Case with Metal Bottom ? Surge Rating Of 300 Amps ? Case to Terminal Isolation Voltage 2500V ? Halogen free available upon request by adding suffix -HF ? Epoxy meets UL 94 V-0 flammability rating ? Moisture Sensit

SINGLE PHASE 15 AMP BRIDGE RECTIFIERS

FEATURES * 300 amperes surge capability * Superior thermal design * Mounting: Hole thru for #8 screw

封裝/外殼：SOT-23-5 細型，TSOT-23-5 功能：升壓 包裝：卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶 描述：IC REG BOOST ADJ 200MA TSOT23-5 集成電路（IC） 穩壓器 - DC-DC 開關穩壓器

封裝/外殼：SOT-23-5 細型，TSOT-23-5 功能：升壓 包裝：卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶 描述：IC REG BOOST ADJ 200MA TSOT23-5 集成電路（IC） 穩壓器 - DC-DC 開關穩壓器

1.3MHz Low Power Boost Converter

文件：151.4 Kbytes Page：4 Pages

1.3MHz Boost Converter

文件：317.48 Kbytes Page：8 Pages

22V、1.3MHz，TSOT23-5 封裝升壓轉換器

1.3MHz Boost Converter

文件：317.48 Kbytes Page：8 Pages

MP1541 TFT Applications Evaluation Board

文件：209.82 Kbytes Page：5 Pages

1.3MHz Boost Converter

文件：317.48 Kbytes Page：8 Pages

4 Output DSL Power Supply

文件：272.62 Kbytes Page：5 Pages

700KHz/1.3MHz Boost Converter with a 2A Switch

文件：460.03 Kbytes Page：10 Pages

2A 電流， 700KHz/1.3MHz 頻率升壓轉換器

700KHz/1.3MHz Boost Converter with a 2A Switch

文件：460.03 Kbytes Page：10 Pages

700KHz/1.3MHz Boost Converter with a 2A Switch

文件：175.45 Kbytes Page：4 Pages

700KHz/1.3MHz Boost Converter with a 2A Switch

文件：460.03 Kbytes Page：10 Pages

MP1542 TFT Applications Evaluation Board

文件：221.9 Kbytes Page：5 Pages

ROD SEALS

?DESCRIPTION The BECA 150 - 152 - 154 profiles are single acting composite rod seals composed of a filled PTFE friction ring and pre-tightened rubber O'Ring. They can be assembled in grooves according to standard ISO 7425/2. Option of connecting the seal to a back-up ring. ?APPLICATIONS

Maintain 0.100 [2.54] Conductor Spacing with Pitch Bars

文件：782.49 Kbytes Page：1 Pages

RUGGED and LIGHTWEIGHT ALUMINUM BATTERY HOLDERS

文件：115.71 Kbytes Page：2 Pages

154/154T/154L/154TL Series OMNI-BLOK Fuse and Holder Assembly

文件：199.17 Kbytes Page：2 Pages

D.C. Reactors or Filter Chokes, Low to Medium Current

文件：181.17 Kbytes Page：1 Pages