国产精品久久久久无码av色戒,大帝av在线一区二区三区,国产肥熟女视频一区二区三区,大陆少妇xxxx做受,被黑人猛躁10次高潮视频

Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted

596/583 Series Circuit Board Mount Enclosed Fuse Holders for 5×20mm Fuses

Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.

文件：1.71293 Mbytes Page：8 Pages

包裝：托盤 描述：BATT CONTACT SOLID MULTI PC PIN 電池產(chǎn)品 電池座，電池夾，電池觸頭

MINIATURE FUSEHOLDERS

文件：216.1 Kbytes Page：1 Pages

Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted

596/583 Series Circuit Board Mount Enclosed Fuse Holders for 5×20mm Fuses

SNx4LVC257A Quadruple 2-Line to 1-Line Data Selectors and Multiplexers With 3-State Outputs

1 Features ? Operate from 1.65V to 3.6V ? Inputs accept voltages to 5.5V ? Maximum tpd of 4.6ns at 3.3V ? Typical VOLP (output ground bounce) 2V at VCC = 3.3V, TA = 25°C ? Latch-up performance exceeds 250mA per JESD 17

SMJ320C6203 Fixed-Point Digital Signal Processor

1 Features 1? High-Performance Fixed-Point Digital Signal Processor (DSP) SMJ320C62x? – 5-ns Instruction Cycle Time – 200-MHz Clock Rate – Eight 32-Bit Instructions/Cycle – 1600 Million Instructions per Second (MIPS) ? 429-Pin Ball Grid Array (BGA) Package (GLP Suffix) ? VelociTI? Advance

DUAL 4-INPUT POSITIVE-NAND GATES

Inputs Are TTL-Voltage Compatible Speed of Bipolar F, AS, and S, With Significantly Reduced Power Consumption Balanced Propagation Delays ±24-mA Output Drive Current – Fanout to 15 F Devices SCR-Latchup-Resistant CMOS Process and Circuit Design Exceeds 2-kV ESD Protection Per MIL-STD-883,

COMPLIMENTARY SWITCH FET DRIVERS

1FEATURES ? Single Input (PWM and TTL Compatible) ? High Current Power FET Driver, 1-A Source/2-A Sink ? Auxiliary Output FET Driver, 0.5-A Source/1-A Sink ? Time Delays Between Power and Auxiliary Outputs Independently Programmable from 50 ns to 700 ns ? Time Delay or True Zero-Voltage O

COMPLIMENTARY SWITCH FET DRIVERS

1FEATURES ? Single Input (PWM and TTL Compatible) ? High Current Power FET Driver, 1-A Source/2-A Sink ? Auxiliary Output FET Driver, 0.5-A Source/1-A Sink ? Time Delays Between Power and Auxiliary Outputs Independently Programmable from 50 ns to 700 ns ? Time Delay or True Zero-Voltage O

Dual Channel, 12-Bit, 80 MSPS A/D Converter with Analog Input Signal Conditioning

GENERAL DESCRIPTION The AD13280 is a complete, dual-channel, signal processing solution that includes on-board amplifiers, references, ADCs, and output termination components to provide optimized system performance. The AD13280 has on-chip track-and-hold circuitry and uses an innovative multipass

SMx320VC33 Digital Signal Processor

1 Features ? High-Performance Floating-Point Digital Signal Processor (DSP) – SMx320VC33-150 – 13-ns Instruction Cycle Time – 150 Million Floating-Point Operations per Second (MFLOPS) – 75 Million Instructions per Second (MIPS) ? 34K × 32-Bit (1.1-Mbit) On-Chip Words of Dual- Access Stati

SMx320VC33 Digital Signal Processor

1 Features ? High-Performance Floating-Point Digital Signal Processor (DSP) – SMx320VC33-150 – 13-ns Instruction Cycle Time – 150 Million Floating-Point Operations per Second (MFLOPS) – 75 Million Instructions per Second (MIPS) ? 34K × 32-Bit (1.1-Mbit) On-Chip Words of Dual- Access Stati

SMx320VC33 Digital Signal Processor

1 Features ? High-Performance Floating-Point Digital Signal Processor (DSP) – SMx320VC33-150 – 13-ns Instruction Cycle Time – 150 Million Floating-Point Operations per Second (MFLOPS) – 75 Million Instructions per Second (MIPS) ? 34K × 32-Bit (1.1-Mbit) On-Chip Words of Dual- Access Stati

Rad-Hard 32-bit SPARC Embedded Processor

Description The TSC695F (ERC32 Single-Chip) is a highly integrated, high-performance 32-bit RISC embedded processor implementing the SPARC architecture V7 specification. It has been developed with the support of the ESA (European Space Agency), and offers a full development environment for embe

Rad-Hard 32-bit SPARC Embedded Processor

Description The TSC695F (ERC32 Single-Chip) is a highly integrated, high-performance 32-bit RISC embedded processor implementing the SPARC architecture V7 specification. It has been developed with the support of the ESA (European Space Agency), and offers a full development environment for embe

Rad-Hard 32-bit SPARC Embedded Processor

Description The TSC695F (ERC32 Single-Chip) is a highly integrated, high-performance 32-bit RISC embedded processor implementing the SPARC architecture V7 specification. It has been developed with the support of the ESA (European Space Agency), and offers a full development environment for embe

Rad-Hard 32-bit SPARC Embedded Processor

Description The TSC695F (ERC32 Single-Chip) is a highly integrated, high-performance 32-bit RISC embedded processor implementing the SPARC architecture V7 specification. It has been developed with the support of the ESA (European Space Agency), and offers a full development environment for embe

Dual Channel, 14-Bit, 65 MSPS A/D Converter with Analog Input Signal Conditioning

PRODUCT DESCRIPTION The AD13465 is a complete dual channel signal processing solution including on-board amplifiers, references, ADCs, and output termination components to provide optimized system performance. The AD13465 has on-chip track-and-hold circuitry and utilizes an innovative multipass a

High Current FET Driver

FEATURES · Totem Pole Output with 6A Source/Sink Drive · 3ns Delay · 20ns Rise and Fall Time into 2.2nF · 8ns Rise and Fall Time into 30nF · 4.7V to 18V Operation · Inverting and Non-Inverting Outputs · Under-Voltage Lockout with Hysteresis · Thermal Shutdown Protection · MINIDIP and Po

High Current FET Driver

FEATURES · Totem Pole Output with 6A Source/Sink Drive · 3ns Delay · 20ns Rise and Fall Time into 2.2nF · 8ns Rise and Fall Time into 30nF · 4.7V to 18V Operation · Inverting and Non-Inverting Outputs · Under-Voltage Lockout with Hysteresis · Thermal Shutdown Protection · MINIDIP and Po

High Current FET Driver

FEATURES · Totem Pole Output with 6A Source/Sink Drive · 3ns Delay · 20ns Rise and Fall Time into 2.2nF · 8ns Rise and Fall Time into 30nF · 4.7V to 18V Operation · Inverting and Non-Inverting Outputs · Under-Voltage Lockout with Hysteresis · Thermal Shutdown Protection · MINIDIP and Po

LMH6628QML Dual Wideband, Low Noise, Voltage Feedback Op Amp

1FEATURES 2? Available with Radiation Ensured 300 krad(Si) ? Wide Unity Gain Bandwidth: 300MHz ? Low Noise: 2nV/√Hz ? Low Distortion: ?65/?74dBc (10MHz) ? Settling Time: 12ns to 0.1% ? Wide Supply Voltage Range: ±2.5V to ±6V ? High Output Current: ±85mA ? Improved Replacement for CLC42

LMH6628QML Dual Wideband, Low Noise, Voltage Feedback Op Amp

1FEATURES 2? Available with Radiation Ensured 300 krad(Si) ? Wide Unity Gain Bandwidth: 300MHz ? Low Noise: 2nV/√Hz ? Low Distortion: ?65/?74dBc (10MHz) ? Settling Time: 12ns to 0.1% ? Wide Supply Voltage Range: ±2.5V to ±6V ? High Output Current: ±85mA ? Improved Replacement for CLC42

LMH6702QML-SP 1.7GHz, Ultra-Low-Distortion, Wideband Op Amp

1 Features ? VS = ±5V, TA = 25°C, AV = +2V/V, RL = 100Ω, VOUT = 2VPP, typical unless noted otherwise ? Available with radiation ensurance – High dose rate 300krad(Si) – ELDRS free 300krad(Si) ? ?3dB bandwidth (VOUT = 0.2VPP) 720MHz ? Low noise 1.83nV/√Hz ? Fast settling to 0.1% 13.4ns

LMH6702QML-SP 1.7GHz, Ultra-Low-Distortion, Wideband Op Amp

1 Features ? VS = ±5V, TA = 25°C, AV = +2V/V, RL = 100Ω, VOUT = 2VPP, typical unless noted otherwise ? Available with radiation ensurance – High dose rate 300krad(Si) – ELDRS free 300krad(Si) ? ?3dB bandwidth (VOUT = 0.2VPP) 720MHz ? Low noise 1.83nV/√Hz ? Fast settling to 0.1% 13.4ns

LMH6715QML Dual Wideband Video Op Amp

FEATURES ? Available with Radiation Ensured 300 krad(Si) TA = 25°C, RL = 100Ω, Typical Values Unless Specified. ? Very Low Diff. Gain, Phase: 0.02%, 0.02° ? Wide Bandwidth: 480MHz (A V = +1V/V); 400MHz (A V = +2V/V) ? 0.1dB Gain Flatness to 100MHz ? Low Power: 5.8mA/Channel ? ?70dB Ch

Low-Voltage Rad-Hard 32-bit SPARC Embedded Processor

Description The TSC695FL (ERC32 Single-Chip) is a highly integrated, high-performance 32-bit RISC embedded processor implementing the SPARC architecture V7specification. It has been developed with the support of the ESA (European Space Agency), and offers a full development environment for embe

Low-Voltage Rad-Hard 32-bit SPARC Embedded Processor

Description The TSC695FL (ERC32 Single-Chip) is a highly integrated, high-performance 32-bit RISC embedded processor implementing the SPARC architecture V7specification. It has been developed with the support of the ESA (European Space Agency), and offers a full development environment for embe

Low-Voltage Rad-Hard 32-bit SPARC Embedded Processor

Description The TSC695FL (ERC32 Single-Chip) is a highly integrated, high-performance 32-bit RISC embedded processor implementing the SPARC architecture V7specification. It has been developed with the support of the ESA (European Space Agency), and offers a full development environment for embe

Low-Voltage Rad-Hard 32-bit SPARC Embedded Processor

Description The TSC695FL (ERC32 Single-Chip) is a highly integrated, high-performance 32-bit RISC embedded processor implementing the SPARC architecture V7specification. It has been developed with the support of the ESA (European Space Agency), and offers a full development environment for embe

2.0 Amp Output Current IGBT Gate Drive Optocoupler

Description The HCPL- 5120 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the dri

2.0 Amp Output Current IGBT Gate Drive Optocoupler

Description The HCPL- 5120 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the dri

2.0 Amp Output Current IGBT Gate Drive Optocoupler

Description The HCPL- 5120 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the dri

2.0 Amp Output Current IGBT Gate Drive Optocoupler

Description The HCPL- 5120 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the dri

2.0 Amp Output Current IGBT Gate Drive Optocoupler

Description The HCPL- 5120 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the dri

2.0 Amp Output Current IGBT Gate Drive Optocoupler

Description The HCPL- 5120 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the dri

2.0 Amp Output Current IGBT Gate Drive Optocoupler

Description The HCPL- 5120 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the dri

0.5 Amp Output Current IGBT Gate Drive Optocoupler

Description The HCPL- 5150 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the dri

0.5 Amp Output Current IGBT Gate Drive Optocoupler

Description The HCPL- 5150 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the dri

0.5 Amp Output Current IGBT Gate Drive Optocoupler

Description The HCPL- 5150 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the dri

0.5 Amp Output Current IGBT Gate Drive Optocoupler

Description The HCPL- 5150 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the dri

0.5 Amp Output Current IGBT Gate Drive Optocoupler

Description The HCPL- 5150 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the dri

0.5 Amp Output Current IGBT Gate Drive Optocoupler

Description The HCPL- 5150 contains a GaAsP LED optically coupled to an integrated circuit with a power output stage. The device is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the dri

TLK2711-SP 1.6Gbps to 2.5Gbps Class V Transceiver

1 Features ? 1.6Gbps to 2.5Gbps (Gigabits per second) serializer/deserializer ? Hot-plug protection ? High-performance 68-pin ceramic quad flat pack package (HFG) ? Low-power operation ? Programmable preemphasis levels on serial output ? Interfaces to backplane, copper cables, or optical

TLK2711-SP 1.6Gbps to 2.5Gbps Class V Transceiver

1 Features ? 1.6Gbps to 2.5Gbps (Gigabits per second) serializer/deserializer ? Hot-plug protection ? High-performance 68-pin ceramic quad flat pack package (HFG) ? Low-power operation ? Programmable preemphasis levels on serial output ? Interfaces to backplane, copper cables, or optical

LMP2012QML Dual High Precision, Rail-to-Rail Output Operational Amplifier

FEATURES ? Total Ionizing Dose 50 krad(Si) ? ELDRS Free 50 krad(Si) ? TCVIO Temperature Sensitivity (Typical) 0.015 μV/°C (For V S = 5V, Typical Unless Otherwise Noted) ? Low Ensured VIO over Temperature 60 μV ? Low Noise with no 1/f 35nV/√Hz ? High CMRR 90 dB ? High PSRR 90 dB ? High AV

?15kV ESD Protected, 3.3V, 1Microamp, 250kbps, RS-232 Transmitters/Receivers

The Intersil 5962-062070xQxA devices are 3.3V powered RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 specifications, even at VCC = 3.0V. Additionally, they provide ±15kV ESD protection (IEC61000-4-2 Air Gap and MIL-STD 883 Human Body Model) on transmitter outputs and receiver i

?15kV ESD Protected, 3.3V, 1Microamp, 250kbps, RS-232 Transmitters/Receivers

The Intersil 5962-062070xQxA devices are 3.3V powered RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 specifications, even at VCC = 3.0V. Additionally, they provide ±15kV ESD protection (IEC61000-4-2 Air Gap and MIL-STD 883 Human Body Model) on transmitter outputs and receiver i

?15kV ESD Protected, 3.3V, 1Microamp, 250kbps, RS-232 Transmitters/Receivers

The Intersil 5962-062070xQxA devices are 3.3V powered RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 specifications, even at VCC = 3.0V. Additionally, they provide ±15kV ESD protection (IEC61000-4-2 Air Gap and MIL-STD 883 Human Body Model) on transmitter outputs and receiver i

?15kV ESD Protected, 3.3V, 1Microamp, 250kbps, RS-232 Transmitters/Receivers

The Intersil 5962-062070xQxA devices are 3.3V powered RS-232 transmitters/receivers which meet ElA/TIA-232 and V.28/V.24 specifications, even at VCC = 3.0V. Additionally, they provide ±15kV ESD protection (IEC61000-4-2 Air Gap and MIL-STD 883 Human Body Model) on transmitter outputs and receiver i

±15kV ESD Protected, 5.0V 1Microamp, 250kbps, RS-232 Transmitters/Receivers

Features ? Meets EIA/TIA-232 and V.28/V.24 Specifications at 5V ? Electrically Screened to DLA SMD#5962-06207 ? QML Qualified per MIL-PRF-38535 Requirements ? SMD Compliance ? Military Temperature Range ? Latch-up Free ? Hermetic Package ? ESD Protection for RS-232 I/O Pins to ±15kV (IEC61

±15kV ESD Protected, 5.0V 1Microamp, 250kbps, RS-232 Transmitters/Receivers

Features ? Meets EIA/TIA-232 and V.28/V.24 Specifications at 5V ? Electrically Screened to DLA SMD#5962-06207 ? QML Qualified per MIL-PRF-38535 Requirements ? SMD Compliance ? Military Temperature Range ? Latch-up Free ? Hermetic Package ? ESD Protection for RS-232 I/O Pins to ±15kV (IEC61

±15kV ESD Protected, 5.0V 1Microamp, 250kbps, RS-232 Transmitters/Receivers

Features ? Meets EIA/TIA-232 and V.28/V.24 Specifications at 5V ? Electrically Screened to DLA SMD#5962-06207 ? QML Qualified per MIL-PRF-38535 Requirements ? SMD Compliance ? Military Temperature Range ? Latch-up Free ? Hermetic Package ? ESD Protection for RS-232 I/O Pins to ±15kV (IEC61

±15kV ESD Protected, 5.0V 1Microamp, 250kbps, RS-232 Transmitters/Receivers

Features ? Meets EIA/TIA-232 and V.28/V.24 Specifications at 5V ? Electrically Screened to DLA SMD#5962-06207 ? QML Qualified per MIL-PRF-38535 Requirements ? SMD Compliance ? Military Temperature Range ? Latch-up Free ? Hermetic Package ? ESD Protection for RS-232 I/O Pins to ±15kV (IEC61

±15kV ESD Protected, 5.0V 1Microamp, 250kbps, RS-232 Transmitters/Receivers

Features ? Meets EIA/TIA-232 and V.28/V.24 Specifications at 5V ? Electrically Screened to DLA SMD#5962-06207 ? QML Qualified per MIL-PRF-38535 Requirements ? SMD Compliance ? Military Temperature Range ? Latch-up Free ? Hermetic Package ? ESD Protection for RS-232 I/O Pins to ±15kV (IEC61

500MHz Rail-to-Rail Amplifiers

Features ? 500MHz -3dB bandwidth ? 600V/μs slew rate ? Low supply current = 11mA ? Supplies from 3V to 5.0V ? Rail-to-rail output ? Input to 0.15V below VS- ? Fast 25ns disable (5962-0623501QPC only) Applications ? Video amplifiers ? Portable/hand-held products ? Communications devices

500MHz Rail-to-Rail Amplifiers

Features ? 500MHz -3dB bandwidth ? 600V/μs slew rate ? Low supply current = 11mA ? Supplies from 3V to 5.0V ? Rail-to-rail output ? Input to 0.15V below VS- ? Fast 25ns disable (5962-0623501QPC only) Applications ? Video amplifiers ? Portable/hand-held products ? Communications devices

500MHz Rail-to-Rail Amplifiers

Features ? 500MHz -3dB bandwidth ? 600V/μs slew rate ? Low supply current = 11mA ? Supplies from 3V to 5.0V ? Rail-to-rail output ? Input to 0.15V below VS- ? Fast 25ns disable (5962-0623501QPC only) Applications ? Video amplifiers ? Portable/hand-held products ? Communications devices

DAC5675A-SP Radiation-Tolerant, 14-Bit, 400-MSPS Digital-to-Analog Converter

1 Features 1? QMLV (QML Class V) MIL-PRF-38535 Qualified, SMD 5962-07204 – 5962-0720401VXC – Qualified over the Military Temperature Range (–55°C to 125°C) – 5962-0720402VXC – Qualified over Reduced Temperature Range (–55°C to 115°C) for Improved Dynamic Performance ? High-Performance 52-P