国产精品久久久久无码av色戒,大帝av在线一区二区三区,国产肥熟女视频一区二区三区,大陆少妇xxxx做受,被黑人猛躁10次高潮视频

1FEATURES

? Input Voltage Range from 3 V to 20 V

? Fixed 600-kHz Switching Frequency

? High- and Low-Side FET RDS(on) Current

Sensing

? Programmable Thermally Compensated OCP

Levels

? Programmable Soft-Start

? 591-mV, 1% Reference Voltage

? Voltage Feed-Forward Compensation

? Supports Pre-Biased Output

? Frequency Spread Spectrum

? Thermal Shutdown Protection at 145°C

? 10-Pin 3 mm × 3 mm SON Package with

Ground Connection to Thermal Pad

CONTENTS

Device Ratings 2

Electrical Characteristics 3

Device Information 8

Application Information 10

Additional References 13

APPLICATIONS

? POL Modules

? Printer

? Digital TV

? Telecom

DESCRIPTION

The TPS40304A is a cost-optimized synchronous buck controller that operates from 3-V to 20-V input. The

controller implements a voltage-mode control architecture with input-voltage feed-forward compensation that

responds instantly to input voltage change. The switching frequency is fixed at 600 kHz.

Frequency Spread Spectrum feature adds dither to the switching frequency, significantly reducing the peak EMI

noise and making it much easier to comply with EMI standards.

The TPS40304A offers design with a variety of user programmable functions, including soft-start, overcurrent

protection (OCP) levels, and loop compensation.

The OCP level is programmed by a single external resistor connected from LDRV pin to circuit ground. During

initial power on, the TPS40304A enters a calibration cycle, measures the voltage at the LDRV pin, and sets an

internal OCP voltage level. During operation, the programmed OCP voltage level is compared to the voltage drop

across the low-side FET when it is on to determine whether there is an overcurrent condition. The TPS40304A

then enters a shutdown and restart cycle until the fault is removed.