国产精品久久久久无码av色戒,大帝av在线一区二区三区,国产肥熟女视频一区二区三区,大陆少妇xxxx做受,被黑人猛躁10次高潮视频

1 Features

1? AEC-Q100 Qualified with:

– Temperature Grade 1: –40°C to +125°C

Ambient Operation Temperature Range

– HBM ESD Classification Level 2

– CDM ESD Classification Level C6

? High Accuracy:

– ±0.75°C (Maximum) from ?10°C to +85°C

– ±1.5°C (Maximum) from ?40°C to +125°C

? Low Quiescent Current:

– 50 μA (Typical)

– 0.1 μA (Standby)

? Resolution: 9 to 12 Bits, User-Selectable

? Digital Output: SMBus?, Two-Wire, and I2C

Interface Compatibility

? 8 I2C, SMBus Addresses

? Wide Supply Range: 2.7 V to 5.5 V

? Small 8-Pin VSSOP and SOIC Packages

? No Specified Power-Up Sequence Required, Two-

Wire Bus Pullups Can Be Enabled Before V+

2 Applications

? Climate Controls

? Infotainment Processor Management

? Airflow Sensors

? Battery Control Units

? Engine Control Units

? UREA Sensors

? Water Pumps

? HID Lamps

? Airbag Control Units

3 Description

The TMP275-Q1 is a ±0.75°C, accurate integrated

digital temperature sensor with a 12-bit, analog-todigital

converter (ADC) that can operate on a supply

voltage as low as 2.7 V and is pin- and registercompatible

with the Texas Instruments' LM75,

TMP75, TMP75B, and TMP175 devices. The

TMP275-Q1 device is available in 8-pin SOIC and

VSSOP packages and requires no external

components to sense temperature. The device is

capable of reading temperatures with a maximum

resolution of 0.0625°C (12 bits) and as low as 0.5°C

(9 bits), thus allowing the user to maximize efficiency

by programming for higher resolution or faster

conversion time. The device is specified over the

temperature range of –40°C to +125°C.

The TMP275-Q1 device features SMBus and twowire

interface compatibility and allows up to eight

devices on the same bus with the SMBus

overtemperature alert function. The factory-calibrated

temperature accuracy and the noise-immune digital

interface make the TMP275-Q1 the preferred solution

for temperature compensation of other sensors and

electronic components, without the need for

additional system-level calibration or elaborate board

layout for distributed temperature sensing.