国产精品久久久久无码av色戒,大帝av在线一区二区三区,国产肥熟女视频一区二区三区,大陆少妇xxxx做受,被黑人猛躁10次高潮视频

1 Features

? Control Inputs VIH/VIL Levels Are Referenced to

VCCA Voltage

? VCC Isolation Feature – If Either VCC Input Is at

GND, Both Ports Are in the High-Impedance State

? Overvoltage-Tolerant Inputs and Outputs Allow

Mixed-Voltage-Mode Data Communications

? Fully Configurable Dual-Rail Design Allows Each

Port to Operate Over the Full 1.2V to 3.6V Power-

Supply Range

? Ioff Supports Partial-Power-Down Mode Operation

? I/Os Are 4.6V Tolerant

? Maximum Data Rates

– 380Mbps (1.8V to 3.3V Level-Shifting)

– 200Mbps (<1.8V to 3.3V Level-Shifting)

– 200Mbps (Level-Shifting to 2.5V or 1.8V)

– 150Mbps (Level-Shifting to 1.5V)

– 100Mbps (Level-Shifting to 1.2V)

? Latch-Up Performance Exceeds 100mA Per JESD

78, Class II

? ESD Protection Exceeds JESD 22

– 8000V Human-Body Model (A114-A)

– 200V Machine Model (A115-A)

– 1000V Charged-Device Model (C101)

2 Applications

? Personal Electronics

? Industrial

? Enterprise

? Telecom

3 Description

This 16-bit noninverting bus transceiver uses

two separate configurable power-supply rails. The

SN74AVC16T245 device is optimized to operate

with VCCA/VCCB set at 1.4V to 3.6V. The device is

operational with VCCA/VCCB as low as 1.2V. The A port

is designed to track VCCA. VCCA accepts any supply

voltage from 1.2V to 3.6V. The B port is designed

to track VCCB. VCCB accepts any supply voltage from

1.2V to 3.6V. This allows for universal low-voltage

bidirectional translation between any of the 1.2V, 1.5V,

1.8V, 2.5V, and 3.3V voltage nodes.

The SN74AVC16T245 device is designed for

asynchronous communication between data buses.

The device transmits data from the A bus to the B

bus or from the B bus to the A bus, depending on

the logic level at the direction-control (DIR) input. The

output-enable ( OE) input can be used to disable the

outputs so the buses effectively are isolated.

The SN74AVC16T245 control pins (1DIR, 2DIR, 1

OE, and 2 OE) are supplied by VCCA.