国产精品久久久久无码av色戒,大帝av在线一区二区三区,国产肥熟女视频一区二区三区,大陆少妇xxxx做受,被黑人猛躁10次高潮视频

1 Features

1? Receiver and Drivers Meet or Exceed the

Requirements of ANSI EIA/TIA-644 Standard

– SN65LVDS105 Receives Low-Voltage TTL

(LVTTL) Levels

– SN65LVDS104 Receives Differential Input

Levels, ±100 mV

? Typical Data Signaling Rates to 400 Mbps or

Clock Frequencies to 400 MHz

? Operates From a Single 3.3-V Supply

? Low-Voltage Differential Signaling With Typical

Output Voltage of 350 mV and a 100-Ω Load

? Propagation Delay Time

– SN65LVDS105 – 2.2 ns (Typ)

– SN65LVDS104 – 3.1 ns (Typ)

? LVTTL Levels Are 5-V Tolerant

? Electrically Compatible With LVDS, PECL,

LVPECL, LVTTL, LVCMOS, GTL, BTL, CTT,

SSTL, or HSTL Outputs With External Networks

? Driver Outputs Are High-Impedance When

Disabled or With VCC <1.5 V

? Bus-Pin ESD Protection Exceeds 16 kV

? SOIC and TSSOP Packaging

2 Applications

? Clock Distribution

? Wireless Base Stations

? Network Routers

3 Description

The SN65LVDS10x are a differential line receiver and

a LVTTL input (respectively) connected to four

differential line drivers that implement the electrical

characteristics of low-voltage differential signaling

(LVDS). LVDS, as specified in EIA/TIA-644 is a data

signaling technique that offers low-power, low-noise

coupling, and switching speeds to transmit data at

relatively long distances. (Note: The ultimate rate and

distance of data transfer is dependent upon the attenuation characteristics of the media, the noise

coupling to the environment, and other system

characteristics.)

The intended application of this device and signaling

technique is for point-to-point baseband data

transmission over controlled impedance media of

approximately 100 Ω. The transmission media may be printed-circuit board traces, backplanes, or cables.

Having the drivers integrated into the same substrate,

along with the low pulse skew of balanced signaling,

allows extremely precise timing alignment of the

signals repeated from the input. This is particularly

advantageous in distribution or expansion of signals

such as clock or serial data stream.

The SN65LVDS10x are characterized for operation from –40°C to 85°C.

The SN65LVDS10x are members of a family of LVDS

repeaters. A brief overview of the family is provided in the Selection Guide to LVDS Repeaters section.