位置:PM5365-PI > PM5365-PI詳情
PM5365-PI中文資料
PM5365-PI數據手冊規格書PDF詳情
DESCRIPTION
The PM5365 VT/TU Mapper and M13 Multiplexer (TEMAP) is a feature-rich device for use in any applications requiring high density link termination over T1 channelized DS3 or T1 and E1 channelized SONET/SDH facilities.
FEATURES
? Integrates a SONET/SDH VT1.5/VT2/TU11/TU12 bit asynchronous mapper, a full featured M13 multiplexer with DS3 framer, and a SONET/SDH DS3 mapper in a single monolithic device for terminating DS3 multiplexed T1 streams, SONET/SDH mapped T1 streams or SONET/SDH mapped E1 streams.
? Five fundamental modes of operation:
? Single STS-1, AU3 or TUG3 Bit Asynchronous VT1.5 or TU-11 Mapper with ingress or egress per tributary link monitoring for 28 T1s.
? DS3 M13 Multiplexer with ingress or egress per link monitoring for 28 T1s.
? Up to 28 DS3 multiplexed T1 streams are mapped as bit asynchronous VT1.5 virtual tributaries or TU-11 tributary units, providing a transmultiplexing (“transmux”) function between DS3 and SONET/SDH with ingress or egress per tributary link monitoring for 28 T1s.
? Single STS-1, AU3 or TUG3 Bit Asynchronous VT2 or TU-12 Mapper with
ingress or egress per tributary link monitoring for 21 E1s or 21 T1s.
? Up to 21 E1 streams multiplexed into a DS3 following the ITU-T G.747 recommendation. This E1 mode of operation is restricted to using the serial clock and data system interfaces.
? Up to 28 VT1.5/TU11 or 21 VT2/TU12 tributaries can be passed between the line SONET/SDH bus and the SBI bus as transparent virtual tributaries with pointer processing.
? When adding and dropping T1 or E1 tributaries the mapper and demapper blocks allow for up to 28 VT1.5/TU11 or 21 VT2/TU12 tributaries to be processed from any tributary location within the full STS-3/STM-1. On the telecom DROP bus side this requires that the STS-3/STM-1 be in locked mode such that the J1 bytes immediately follow the C1 bytes.
? Supports a byte serial Scaleable Bandwidth Interconnect (SBI) bus interface for high density system side device interconnection of up to 84 T1 streams, 63 E1 streams or 3 DS3 streams. This interface also supports transparent virtual tributaries when used with the SONET/SDH mapper.
? Provides jitter attenuation in the T1 or E1 receive and transmit directions.
? Provides two independent de-jittered T1 or E1 recovered clocks for system timing and redundancy.
? Provides an on-board programmable binary sequence generator and detector for error testing at DS3 rates. Includes support for patterns recommended in ITU-T O.151.
? Also provides PRBS generators and detectors on each tributary for error testing at DS1, E1 and NxDS0 rates as recommended in ITU-T O.151 and O.152.
? Supports the M23 and C-bit parity DS3 formats.
? Standalone unchannelized DS3 framer mode for access to the entire DS3 payload.
? When configured to operate as a DS3 Framer, gapped transmit and receive clocks can be optionally generated for interface to link layer devices which only need access to payload data bits.
? DS3 Transmit clock source can be selected from either an external oscillator or from the receive side clock (loop-timed).
? Provides a SONET/SDH Add/Drop bus interface with integrated VT1.5, TU- 11, VT2 and TU-12 mapper for T1and E1 streams. Also provides a DS3 mapper.
? Register level compatibility with the PM8315 TEMUX, the PM4388 TOCTL Octal T1 Framer, the PM6388 EOCTL Octal E1 Framer, the PM4351 COMET E1/T1 transceiver and the PM8313 D3MX M13 Multiplexer/Demultiplexer.
? Provides a generic 8-bit microprocessor bus interface for configuration, control and status monitoring.
? Provides a standard 5 signal P1149.1 JTAG test port for boundary scan board test purposes.
? Low power 2.5V/3.3V CMOS technology. All pins are 5V tolerant.
? 324-pin fine pitch PBGA package (23mm x 23mm). Supports industrial temperature range (-40°C to 85°C) operation.
APPLICATIONS
? SONET/SDH Add Drop Multiplexers
? SONET/SDH Terminal Multiplexers
? M23 Based M13 Multiplexer
? C-Bit Parity Based M13 Multiplexer
? Channelized and Unchannelized DS3 Frame Relay Interfaces
PM5365-PI產品屬性
- 類型
描述
- 型號
PM5365-PI
- 制造商
PMC
- 制造商全稱
PMC
- 功能描述
VT/TU MAPPER AND M13 MULTIPLEXER
供應商 | 型號 | 品牌 | 批號 | 封裝 | 庫存 | 備注 | 價格 |
---|---|---|---|---|---|---|---|
PMC |
2447 |
BGA |
100500 |
一級代理專營品牌!原裝正品,優勢現貨,長期排單到貨 |
|||
PMC |
1923+ |
BGA |
2000 |
自己庫存原裝正品特價出售 |
|||
PMC |
2138+ |
BGA |
8960 |
專營BGA,QFP原裝現貨,假一賠十 |
|||
PMC |
2022 |
BGA |
2600 |
全新原裝現貨熱賣 |
|||
PMC |
23+ |
BGA |
4500 |
全新原裝、誠信經營、公司現貨銷售! |
|||
PMC |
23+ |
BGA |
3000 |
一級代理原廠VIP渠道,專注軍工、汽車、醫療、工業、 |
|||
PMC |
24+ |
500000 |
行業低價,代理渠道 |
||||
PMC |
22+ |
BGA |
3000 |
原裝正品,支持實單 |
|||
PMC |
23+ |
BGA |
9920 |
原裝正品,支持實單 |
|||
PMC |
23+ |
BGA |
25 |
現貨庫存 |
PM5365-PI 資料下載更多...
PM5365-PI 芯片相關型號
Datasheet數據表PDF頁碼索引
- P1
- P2
- P3
- P4
- P5
- P6
- P7
- P8
- P9
- P10
- P11
- P12
- P13
- P14
- P15
- P16
- P17
- P18
- P19
- P20
- P21
- P22
- P23
- P24
- P25
- P26
- P27
- P28
- P29
- P30
- P31
- P32
- P33
- P34
- P35
- P36
- P37
- P38
- P39
- P40
- P41
- P42
- P43
- P44
- P45
- P46
- P47
- P48
- P49
- P50
- P51
- P52
- P53
- P54
- P55
- P56
- P57
- P58
- P59
- P60
- P61
- P62
- P63
- P64
- P65
- P66
- P67
- P68
- P69
- P70
- P71
- P72
- P73
- P74
- P75
- P76
- P77
- P78
- P79
- P80
- P81
- P82
- P83
- P84
- P85
- P86
- P87
- P88
- P89
- P90
- P91
- P92
- P93
- P94
- P95
- P96
- P97
- P98
- P99
- P100
- P101
PMC-Sierra, Inc
PMC-Sierra, Inc. 是一家專注于網絡和存儲半導體解決方案的公司,成立于1986年,總部位于美國加利福尼亞州。該公司致力于為數據中心、企業網絡和電信市場提供高性能的集成電路和相關技術。PMC-Sierra 的產品線包括網絡處理器、存儲控制器和光纖通道解決方案,廣泛應用于服務器、路由器和交換機等設備中。憑借其在技術創新和設計方面的領先地位,PMC-Sierra 致力于幫助客戶提高數據傳輸速度和系統性能。2016年,公司被 Broadcom Inc. 收購,進一步增強了其在半導體行業的競爭力。